Follow

Permits to Work > Starting and Stopping Work

Once a Permit has been approved and it is within the time frame of the Permit, you can select when work starts and when work finishes.

The point of contact for the Permit will also be notified (by email and/or sms) at the start and finish times of the Permit to remind them to sign in and out of the Permit.

To Start Work:

  • Log into HammerTech (if you are not already logged in), then navigate using the left hand menu PERMITS > View All
  • Select the green >> Start Work icon for the Permit you wish to Start Work for

  • A screen will appear with the details of the Permit, confirm that the details are correct, complete any checklists that have been setup, and sign and print your name in the spaces provided.
  • Select the green Start Work icon.
  • Note: For auditing, safety and data consistency you are not able to alter a permit start time, employer or zone, after work has actually commenced in that zone.

 

To Stop Work:

  • Log into HammerTech (if you are not already logged in), then navigate using the left hand menu PERMITS > View All
  • Select the orange Stop Work icon

  • A screen will appear with the details of the Permit, confirm that the details are correct, complete any checklist questions, and sign and print your name in the spaces provided
  • Select the yellow Finish Work icon

Permits_Finish_Work.jpg

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk